Follow these steps to program the remote control to operate a television.

1. Turn on the television to be programmed.
2. On the remote control, move the TV/DVD VIDEO switch to TV.
3. Press and hold the I/O button.
4. While holding the I/O button, enter the television manufacturer code number using the number pad. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
5. Release the I/O button.
6. Point the remote control at the television.
7. Press the POWER button to verify operation.

Notes:

• If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
• If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
• The previously entered code number will be erased when you enter a new code on the remote.
• You may need to reprogram the remote after replacing the batteries.
• If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
• The operation of a combination deck of any kind is not guaranteed.
• Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
• You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.