Follow these steps to program the remote control.

1. Turn on the component to be programmed.
2. On the remote control, press the CODE SET button.
3. Press the appropriate FUNCTION button for the type of component being programmed.
4. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
5. Press the ENTER button.
6. Point the remote control at the component.
7. Press the appropriate component POWER button to verify operation.

Notes:

• If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
• If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
• The previously entered code number will be erased when you enter a new code on the remote.
• You may need to reprogram the remote after replacing the batteries.
• If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
• The operation of a combination deck of any kind is not guaranteed.
• Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
• You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.