Skip to the end of navigation


Remote Codes and Programming Instructions

print page


Remote for TAE-1000ESP

Programming Codes

No remote codes are available here for the RM-P1000.

Check the manual for the remote, or the device it came with (e.g. TV, Blu-ray player, etc.), for codes.

Programming Instructions

Follow these steps to program the remote control.

IMPORTANT: This remote control is only programmable using the learn function and does not have any manufacturer programming codes.

  1. Place the remote control on a flat surface.
  2. Place the remote control of the device to be controlled, head-to-head, and approximately 2 inches from the remote control being programmed.
  3. On the amplifier remote control, set the mode selector to LEARN.
  4. Select the equipment to be learned by pressing the appropriate MODE button.
  5. Press and hold the button to be taught until the LEARN indicator lights up.
  6. On the other manufacturer's remote, press and hold the button to be learned until the LEARN indicator on the amplifier remote goes off.
  7. Release both buttons. Note: Repeat steps 4, 5, 6, and 7 for any other buttons that you may want to program.
  8. Set the mode selector to USER STD or SONY STD.


  • If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
  • If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
  • The previously entered code number will be erased when you enter a new code on the remote.
  • You may need to reprogram the remote after replacing the batteries.
  • If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
  • You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.