Skip to the end of navigation
US flagUSA  


Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.



Code Choices

Cable Box
CD Player
DAT Deck
Digital Satellite receiver
DVD Player
Laser Disc Player
MD Deck
Tape Deck
Video CD Player

Programming Instructions

Follow these steps to program the remote control.

  1. On the remote control, press and hold the USE MODE button.
  2. While holding down the USE MODE button, press the A/V I/O button.
  3. Release the USE MODE button.
  4. Move the Easy Scroll key to select the input (component) to be controlled.
  5. Press teh Easy Scroll key.
  6. Press the number buttons to enter the numeric code corresponding to the component and the make of the component to be controlled.
  7. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

  8. Press the ENTER button.


  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.