Skip to the end of navigation


Remote Codes and Programming Instructions

print page


Remote Control

Programming Codes

No remote codes are available here for the NSG-MR1.

Check the manual for the remote, or the device it came with (e.g. TV, Blu-ray player, etc.), for codes.

Programming Instructions

This remote control is programmable through the menu system of the Google Device. Follow these steps to access the menu system of the Google Device.

Note: Programming information is also available in the Setup Guide of the Google device.

To control a cable or satellite set-top box:

  1. Connect an IR Blaster to the unit and place it properly on the cable/satellite box.
  2. Press Fn + 1 and select [Video input].
  3. Select [Add device manually], then follow the on-screen instructions.

To control an AV receiver:

  1. Connect an IR Blaster to the unit and place it properly on the AV Receiver.
  2. Press Fn + 1 and select [TV & AVR] - [AV Receiver setting].
  3. Check the box next to [Control with IR Blaster].
  4. Select the manufacturer of the AV Receiver, then set the IR Blaster code for the AV Receiver.


  • If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
  • If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
  • The previously entered code number will be erased when you enter a new code on the remote.
  • You may need to reprogram the remote after replacing the batteries.
  • If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
  • You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.