Follow these steps to program the remote control.

1. On the remote control, touch SETUP.
2. Touch FUNCTION&USER IR.
3. Touch the function (category) to be registered.
4. Touch the component manufacturer and type.
5. Touch the remote controller mode of the connected component.

Notes:

• If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
• If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
• The previously entered code number will be erased when you enter a new code on the remote.
• You may need to reprogram the remote after replacing the batteries.
• If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
• The operation of a combination deck of any kind is not guaranteed.
• Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
• You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.