Skip to the end of navigation

Remote Codes and Programming Instructions

print page


Integrated Remote Commander

Programming Codes

Select the brand name from the drop down list for each device for which you want to see codes.

Note: If your device brand is not listed, try the codes listed for other brands.



Code Choices

AV Receiver  
Cable Box  
CD Player  
DAT Deck  
Digital Satellite receiver  
Digital Signal Processor (DSP)  
DVD Player  
Laser Disc Player  
MD Deck  
Mini Hi-Fi Component System CD  
Mini Hi-Fi Component System Receiver  
Mini Hi-Fi Component System Tape  
Tape Deck  
TV/VCR Combo (TV)  
TV/VCR Combo (VCR)  

Programming Instructions

Follow these steps to program the remote control.

  1. Turn on the component to be programmed.
  2. On the remote control, press and hold the COMMANDER OFF button.
  3. While holding the COMMANDER OFF button, press the MUTING button.
  4. Release the COMMANDER OFF button.
  5. Press the component select button for the desired component.
  6. Using the number display on the LCD, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  7. Touch ENTER.
  8. Press the COMMANDER OFF button.
  9. Press the component select button for the component programmed.
  10. Turn on the component using the power button on the component.
  11. Point the remote control at the component and touch the POWER key to verify operation.


  • If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
  • If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
  • The previously entered code number will be erased when you enter a new code on the remote.
  • You may need to reprogram the remote after replacing the batteries.
  • If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
  • You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.

Was this information helpful?

Yes No