Programming Other Equipment

Follow the steps below to program your TV remote control.

1) Find the code that corresponds to your equipment here. If more than one code is provided, try programming the first code listed.
2) Press and hold DVD, AMP or STB simultaneously with the INPUT button and release. When in the programming mode, the FUNCTION button blinks for approximately 30 seconds until a code is entered.
3) Enter the five digit code using 0-9 while the FUNCTION button is lit. If the code is not entered within 30 seconds, you must repeat step 2.
4) Press or ENT to confirm the code. If successfully programmed, the FUNCTION button blinks twice; if not, it blinks five times.

  • Any of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, DVD can be programmed to operate a Blu-ray Disc player.

Confirm the Programming

If you can turn your equipment on and off using the green POWER button, the programming is
complete. If not, try the next code listed.

  • In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control.



Back to Programming the Remote Control Next to Remote Control Backlight