Using a Wall-Mount Bracket
Your TV can be mounted to a wall using the Wall-Mount Bracket (not supplied) out of the box as packaged.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and that wall-mounting of your TV should be performed by a Sony dealer or licensed contractor.
- Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.
- Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting hooks to the TV set. (Do not use the screws that are intended for the Table-Top Stand attachment.) The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. Use of screws other than those supplied with the bracket may result in internal damage to the TV set or cause it to fall, etc.
- Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children.
|
 |
For details on how to use the Wall-Mount Bracket
compatible with your model, visit
www.sony.com/accessories or
call 1-800-488-7669 (United States)
1-877-899-7669 (Canada)
Follow the simple steps below to remove the
Table-Top Stand:
| 1) |
Unplug the AC power cord and disconnect all
the cables from the TV. |
 |
| 2) |
Secure the Mounting Hook to the rear of the
TV. |
| 3) |
Adjust the angle of the Mounting Hook. |
| 4) |
Remove the screws on the rear of the TV (see
illustration in the next column). Do not
remove any other screws from the TV. |
| 5) |
When screws are removed, lift the TV off the
stand. Make sure that you carry out this task
with at least two or three people. Do not
attempt to lift the TV by yourself. |
| |
|