BRAVIA Sync with
Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment supporting the Control for HDMI function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection. Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI input when connecting the HDMI cable. |
 |
Setting the Control for HDMI
The Control for HDMI function must be set up in
order for the TV to communicate with other Control for HDMI enabled equipment. To setup the TV’s Control for HDMI:
| 1) |
Select Channels & Inputs on the Settings menu. |
| 2) |
Highlight HDMI Settings and press  |
| 3) |
Select Control for HDMI and set it to On. |
To verify connected devices, select Device List from the HDMI Settings menu. For other equipment, refer to its operating instructions.
Available options using Control for HDMI
The following operations are available after you
connect the supported Sony equipment with Control for HDMI function to your TV:
- Automatically turn off the connected equipment
when you turn off the TV.
- The connected equipment and TV are turned on by One-Touch-Play.
- Possible operations with SYNC MENU buttons.
When a Sony A/V receiver with BRAVIA Sync is
connected, the following additional operations are
possible:
- Turning on the A/V receiver when the TV is
turned on.
- Automatically switching to the audio output of
the A/V receiver’s attached speakers.
- Adjusting the volume and muting of the A/V
receiver with the TV’s remote control.
|
|
|