PC
Use the TV as a monitor for your PC by connecting a HD15-HD15 cable as shown below. This TV can
also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.)
- Connect the PC IN jack to the PC using an HD15-
HD15 cable with ferrite core (analog RGB) and audio
cable.
- If the PC is connected to the TV and no signal has been
input from the PC for more than 5 minutes, the TV
enters the standby mode automatically. Refer to the PC Power Management option under Setup Menu.
PC and HDMI Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the supported resolutions
and timings indicated below.
| Supported Resolutions |
Horizontal
frequency (kHz) |
Vertical
frequency (kHz) |
Standard |
| Signal |
Horizontal (Pixel) |
x |
Vertical (Line) |
| VGA |
640 |
x |
480 |
31.5 |
60 |
VGA |
| SVGA |
800 |
x |
600 |
37.9 |
60 |
VESA Guidelines |
| XGA |
1,024 |
x |
768 |
48.4 |
60 |
VESA Guidelines |
| WXGA |
1,280 |
x |
768 |
47.8 |
60 |
VESA |
| 1,360 |
x |
768 |
47.7 |
60 |
VESA |
| SXGA |
1,280 |
x |
1,024 |
64.0 |
60 |
VESA |
| HDTV |
1,920 |
x |
1,080 |
67.5 |
60 |
CEA-861 |
- This TV’s PC input does not support Sync on Green or
Composite Sync.
- This TV’s PC VGA input does not support interlaced
signals.
- Adjust Phase to eliminate horizontal lines of the picture when the TV receives an input signal from the connected PC.
|