REMOTE CODES & PROGRAMMING INSTRUCTIONS

RM-ANP037

Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.

Component

Brand

Code Choices

Blu-Ray Disc Recorder
 
Cable Box
 
Digital Satellite receiver
 
DVD Player
 
DVD Recorder
 
DVD/PVR Combination
 
TV
 
VCR
 

Programming Instructions

Follow these steps to program the remote control.

  1. On the remote control, press and hold the component button to be programmed.
  2. While holding the component button, press the (yellow) TV button.
  3. NOTE: The (yellow) TV button will flash,

  4. While the (yellow) TV button is flashing, enter the component's manufacturer code using the number pad.
  5. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

NOTES:

  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, use the remote control that was provided with the equipment or purchase a universal remote control that has a learning function.
  • If programming fails, it may be necessary to reset the remote control. To reset the remote control, remove the batteries and press each button on the remote control twice.