REMOTE CODES & PROGRAMMING INSTRUCTIONS

NSG-MR1

Programming instructions for this remote are shown at the bottom of this page.

No remote codes are currently available online for the NSG-MR1.

Remote codes are often listed in the product manual, so it is recommended you check there.

Note: If this remote came with another Sony product (e.g. TV, DVD, etc...), the remote codes may be listed in the manual for that product.

Programming Instructions

To control a cable or satellite set-top box:

  1. Connect an IR Blaster to the unit and place it properly on the cable/satellite box.
  2. Press Fn + 1 and select [Video input].
  3. Select [Add device manually], then follow the on-screen instructions.

To control an AV receiver:

  1. Connect an IR Blaster to the unit and place it properly on the AV Receiver.
  2. Press Fn + 1 and select [TV & AVR] - [AV Receiver setting].
  3. Check the box next to [Control with IR Blaster].
  4. Select the manufacturer of the AV Receiver, then set the IR Blaster code for the AV Receiver.

Further information can be found in the Online Help Guide.