Skip to the end of navigation

Remote Codes and Programming Instructions

print page


Remote Control

Programming Codes

No remote codes are available here for the NSG-MR1.

Check the manual for the remote, or the device it came with (e.g. TV, Blu-ray player, etc.), for codes.

Programming Instructions

To control a cable or satellite set-top box:

  1. Connect an IR Blaster to the unit and place it properly on the cable/satellite box.
  2. Press Fn + 1 and select [Video input].
  3. Select [Add device manually], then follow the on-screen instructions.

To control an AV receiver:

  1. Connect an IR Blaster to the unit and place it properly on the AV Receiver.
  2. Press Fn + 1 and select [TV & AVR] - [AV Receiver setting].
  3. Check the box next to [Control with IR Blaster].
  4. Select the manufacturer of the AV Receiver, then set the IR Blaster code for the AV Receiver.


  • If more than one code number is listed for your device brand, enter one code at a time until you find one that works.
  • If none of the codes listed for your device brand worked, try codes listed for other brands or perform a search for the correct code (available only on certain models). Check the manual for information about the search option.
  • The previously entered code number will be erased when you enter a new code on the remote.
  • You may need to reprogram the remote after replacing the batteries.
  • If programming fails, you may need to reset the remote control: Remove the batteries, press each button twice, and then put the batteries back in.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some functions of a device may not be controllable by the remote. Please refer to the device manual for details.
  • You may not be able to operate your non-Sony equipment with this remote control. This occurs when the device uses codes not provided for this remote. In this case, please use the device's original remote control or purchase a universal remote control that has a learning function.