Skip to the end of navigation

Remote Codes and Programming Instructions


Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.



Code Choices

AV Receiver
DVD Player

Programming Instructions

Follow these steps to program the remote control.

  1. Turn on the device to be programmed.
  2. On the remote control, move the device switch to the appropriate component TV, DVD, or AMP.
  3. Press and hold the AUX POWER button.
  4. While holding the AUX POWER button, press and hold the MENU button until the LED blinks slowly.
  5. Release the AUX POWER and MENU buttons.
  6. Enter the three digit component manufacturer code using the number pad.
  7. NOTE: If more than one key code sequence is listed for the manufacturer, enter one code at a time until you find one that works.

  8. Press the ENTER button.
  9. Point the remote control at the component.
  10. Press the AUX POWER button to verify operation.


  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.

NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.