REMOTE CODES & PROGRAMMING INSTRUCTIONS

RM-VL1000/B

Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.

Component

Brand

Code Choices

AV Receiver
 
Cable Box
 
CD Player
 
DAT Deck
 
Digital Satellite receiver
 
DVD Player
 
MD Deck
 
Mini Hi-Fi Component System CD
 
Mini Hi-Fi Component System MD Deck
 
Mini Hi-Fi Component System Receiver
 
Mini Hi-Fi Component System Tape
 
Tape Deck
 
TV
 
TV/VCR Combo (TV)
 
TV/VCR Combo (VCR)
 
VCR
 

Programming Instructions

Follow these steps to program the remote control.

  1. Turn on the remote control to be programmed.
  2. On the remote control, press and hold the SET button until SET appears on the LCD.
  3. Press the appropriate label select button to select PRESET.
  4. Press the appropriate label select button to select the desired component.
  5. NOTE: Press the SCROLL button to access additional component types.

  6. Using the number pad, enter the component's manufacturer code.
  7. NOTE: If more than one code number is listed for the manufacturer, repeat the procedure, entering one code at a time until you find one that works.

  8. Press the ENT button.
  9. Point the remote control at the component.
  10. Press the POWER button to verify operation.

NOTES:

  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • If none of the codes listed for the manufacturer work, it may be necessary to try codes listed for other manufacturers or perform a search for the correct code. Consult the Operating Instructions provided with the remote control for steps on searching for the correct code.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.