REMOTE CODES & PROGRAMMING INSTRUCTIONS

RM-PP413

Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.

Component

Brand

Code Choices

Cable Box
 
CD Player
 
DAT Deck
 
Digital Satellite receiver
 
DVD Player
 
Laser Disc Player
 
MD Deck
 
Tape Deck
 
Tuner
 
TV
 
VCR
 
Video CD Player
 
How to Program the RM-PP413 Remote Control:    (back to Top)  | Print this page

Programming Instructions

Follow these steps to program the remote control.

  1. On the remote control, press and hold the RM SET UP button.
  2. While holding down the RM SET UP button, press and release the A/V I/O button.
  3. Release the RM SET UP button.
  4. Press the input (component) button to be controlled.

    5. NOTE: To program a television press the TV I/O button.

  5. Press the number buttons to enter the numeric code corresponding to the component and the make of the component to be controlled.

    6. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

  6. Press the ENTER button.

NOTES:

  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.
    •