REMOTE CODES & PROGRAMMING INSTRUCTIONS

RM-V30

Programming instructions for this remote are shown at the bottom of this page.

No remote codes are currently available online for the RM-V30.

Remote codes are often listed in the product manual, so it is recommended you check there.

Note: If this remote came with another Sony product (e.g. TV, DVD, etc...), the remote codes may be listed in the manual for that product.

How to Program the RM-V30 Remote Control:    (back to Top)  | Print this page

Programming Instructions

Follow these steps to program the remote control.

  1. Turn on the component to be programmed.
  2. On the remote control, move the VCR CABLE TV switch to the desired position.
  3. Press and release the SET button.
  4. Press and release the CH + button.
  5. Press and release the POWER button.
  6. Repeat steps 4 and 5 until the component powers off.
  7. When the component powers off, press the TV/VIDEO button.

NOTES:

  • When the batteries are replaced, the programming may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • If none of the codes listed for the manufacturer work, it may be necessary to try codes listed for other manufacturers or perform a search for the correct code. Consult the Operating Instructions provided with the remote control for steps on searching for the correct code.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.
    •