REMOTE CODES & PROGRAMMING INSTRUCTIONS

RMT-D108A

Programming instructions for this remote are shown at the bottom of this page.

Select the brand name from the drop down list for each component for which you want to see codes.

Component

Brand

Code Choices

AV Receiver
 
TV
 

Programming Instructions

Follow these steps to program the remote control.

To control a TV:
  1. Turn on the TV.
  2. On the remote control, slide the TV/DVD RECEIVER switch to TV.
  3. Press and hold the I/O (POWER) button.
  4. While holding the I/O (POWER) button, enter the manufacturer's code using the number buttons.
  5. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

  6. Release the I/O (POWER) button.
  7. Point the remote control at the TV.
  8. Press the I/O (POWER) button to verify operation.
To control an AV receiver:
  1. Turn on the AV receiver.
  2. On the remote control, slide the TV/DVD RECEIVER switch to DVD RECEIVER.
  3. Press and hold the I/O (POWER) button.
  4. While holding the I/O (POWER) button, enter the manufacturer's code using the number buttons.
  5. NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

  6. Release the I/O (POWER) button.
  7. Point the remote control at the AV receiver.
  8. Press the I/O (POWER) button to verify operation.

NOTES:

  • If a new code number is entered, the code number previously entered will be erased.
  • When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
  • The operation of a combination deck of any kind is not guaranteed.
  • Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
  • In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's own remote control.