Follow these steps to program the remote control.

1. On the remote control, press and hold the component button to be programmed.
2. While holding the component button, press the (yellow) TV button.

NOTE: The (yellow) TV button will flash,

3. While the (yellow) TV button is flashing, enter the component's manufacturer code using the number pad.

NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

NOTES:

• If a new code number is entered, the code number previously entered will be erased.
• When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
• The operation of a combination deck of any kind is not guaranteed.
• Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
• In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, use the remote control that was provided with the equipment or purchase a universal remote control that has a learning function.
• If programming fails, it may be necessary to reset the remote control. To reset the remote control, remove the batteries and press each button on the remote control twice.