Follow these steps to program the remote control.

1. Turn on the televison to be programmed.
2. On the remote control, slide the TV/DVD switch to TV.
3. Press and hold the TV I/O button.
4. While holding the TV I/O button, enter the manufacturer key code sequence.

NOTE: If more than one key code sequence is listed for the manufacturer, enter one code at a time until you find one that works.

5. Release the TV I/O button.
6. Point the remote control at the television.
7. Press the TV I/O button to verify operation.

NOTES:

• If a key code sequence is entered, the code number previously entered will be erased.
• When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.
• Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.
• In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, use the remote control that was provided with the equipment or purchase a universal remote control that has a learning function.
• If programming fails, it may be necessary to reset the remote control. To reset the remote control, remove the batteries and press each button on the remote control twice.